Choosing Commercial Roofing Systems

Typical commercial roofing problems that you may experience at your facility include single-ply rubber. Single-ply roofing is considered the cheapest and least labor-intensive form of roofing available in commercial markets. Unfortunately, it can also be the most dangerous. Single-ply roofing dangers include cracked or chipped shingles, buckled, missing, or loose tiles, flaking or splitting tar paper backing, and insect infestation.

Commercial asphalt or tar roofing is another popular choice for commercial roofing materials. These roofs have gained popularity over residential roofing materials for several reasons. They are relatively inexpensive, have excellent fire retardant characteristics, and require less maintenance than other commercial roofing materials. Unfortunately, they have some disadvantages as well.

The biggest drawback of asphalt or tar roofs is their lifespan. Asphalt is a petroleum product that wears out or breaks down with heavy foot traffic. Over time, asphalt roofing wears out because it develops mildew and its material deteriorates. The development of mildew can create health risks as well as reduce the lifespan of the roof itself.

A drawback of asphalt and tar roofs is that they require more maintenance than other commercial roofing materials. Asphalt and tar roofs are more susceptible to weather damage and require extra attention when it comes to snow removal and repair. Single-ply roofs, such as asphalt or metal roofing materials, do not have this problem because they do not need extra protection from the weather and temperature changes. Unfortunately, this aspect of commercial roofing materials makes them less appealing to commercial roofing buyers.

The least attractive type of commercial roofing to most commercial roofing buyers is metal roofing systems. Metal roofing systems are typically comprised of steel that are extremely strong and durable, but they are also heavy and expensive. The downside of metal roofing is its long lifespan. It takes at least 50 years for a metal roof to start showing signs of wear and tear, but then, it can take even longer.

The two roofing materials that prove the least appealing to commercial roofing buyers are wooden roofs and composite roofs. Wooden roofs are very attractive and add value to your property. However, residential roofing is significantly more durable than commercial roofing, which means residential roofs will be much more stable. Composite roofing systems combine the benefits of both wood and metal to create a strong, durable roof that is also easy to maintain and install. This type of roof has the potential to save you more money in the long run.

The final type of commercial roof types to look at is energy efficiency. Energy efficiency is directly related to the quality of the roof. A higher energy efficiency rating means less money you’ll have to spend on utilities every month. It is imperative that you research all the different types of energy-efficiency ratings available. Then, you can focus on the roof you would like the best (i.e., the one with the highest energy efficiency). You can get this information online.

The last thing to check out is the roofing material. Metal-commercial roofing is typically constructed with steel and aluminum caps and polyester. Fiberglass is also used in certain commercial roofing material systems. It is important to note that while fiberglass is a high-quality, durable material, it also adds to the final cost of the roof installation. For this reason, it is typically only used on roofs that are being replaced anyway.

When you have checked all the different commercial roofing types, you should focus on the new roof type. For your new roof to be both durable and energy-efficient, you should install it in an area with good drainage. If your new roof system includes a new cap sheet, you should make sure that the cap sheets are made with a reflective material. You should note that if the surface underneath the cap sheets is not highly reflective, this will add to your energy efficiency problems.

Next, you should discuss the types of shingles and fibers you will use on your new roof. The most common types of shingles used today are either asphalt or metal. The most durable shingles, however, are the fiberglass or fire-resistant tiles. Metal and asphalt shingles are only good for areas where extreme weather conditions are a part of the climate. For areas outside of these climates, you should use fire-resistant tiles.

When you talk to contractors at Flat Roof Repair Houston, they will usually give you a few different suggestions for installing the new roofing system. Although there are a few different methods of installation, most of them utilize the same core elements. There are some slight variations to the core elements, such as the number of insulation layers, the thickness of the membrane, the method by which the core layers are applied, and whether or not the roofing materials are installed with overlapping seams. Keep in mind that you should get the best product available when you choose the different components of the new roof.